its only for the rev.6b (its printed on the PCB - left hand to the DC-DC converter)
...
Mouser: (not approved) but contains the most parts as we use in rev.5-6 with some changes from me, it must be 99% perfect.
https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=857be93ec1
don't miss to order a powersupply - wandwart 12V DC 500mA or more
...
internal note:
17x G-628S-0001 gateswitch and SW22
1x GF-642-6010 4PDT switch. (SW4)
2x 629-GF-326-0001 SW2 and SW21
for Patricks Custom case: add 2x 30mm or less depends on case height, which are M3 Spacer (female - female)
you also need screws for the side panels: 10x M3 10mm
Don't miss to order the Clock Divider Parts