| Panel | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||
Released 11/2013 the buildguide is only for rev.1 - check for TTSH rev.2 this PAGE rev3 herelast Modification Date: 20.June 2017 - Voltage processor TL071 instead of LM301 updated 21-November 2024 for new design after server change BOM from me: BOM TTSH modified rev.1 Dokumentation: http://thehumancomparator.net/building/ Schematic: TTSH-schematics.pdf (also avaiable on zthees webserver) PCB reference designators: TTSHcompplc.zip thx to http://tauntek.com/TTSH.htm Muffwiggler Forum infos: (first page) http://www.muffwiggler.com/forum/viewtopic.php?t=98954&postdays=0&postorder=desc&start=2130
wiring from PSU to the module headers are wrong "silkreen error" +/- must crossed - doublecheck before power up modules, you find other issues in the second tab here |
| Child pages (Children Display) | ||
|---|---|---|
|
Please read Buildings tips and known Issues site to save time and money.
...
PSU with DC-DC Voltage "regulator"
right picture shows the X-crossed ferrite bead to fix the -15/+15V silkscreen error,
cross one Ferrite on top pcb side - the ferrite on other pcb site (not shown here)
...
VCO testing - connect a + 15v cable to power distribution header and at the other side to the resistor as shown
...