ISE-NIN Manuals and Firmware

The Firmware isn't official released (08.Oct.2022), please wait for the release candidate to avoid trouble with functions and calibration.

User Manual:

tbd. by BC

Firmware:

04.Nov.2022:  

new beta, you need to reset preset banks and settings after uploading the new firmware in ISE-NIN.

ISENIN_1.0.2B.zip

if you still have the old beta, you have to install again both files and you need to reset preset banks and settings after uploading the new firmware in ISE-NIN.

Firmware Installation

The latest Firmware is on a separate page : ISE-NIN Manuals and Firmware

Instructions for Flashing

• Connect STM LINK to the Motherboard

• Turn ISENIN on

• Open STM Cube Programmer 

• Select ST-Link, select connect

• Select erasing and programming button

• Browse select ISENIN 1.0b-1 Start programming

!! Disconnect the programmer and restart the ISE-nin

• Repeat the procedure described above and select ISENIN 1.0b-2 Start programming

• Disconnect and restart ISE-NIN

1.x → wait

Changelog: (of this page)