ISE-NIN Manuals and Firmware

The Firmware isn't official released (08.Oct.2022), please wait for the release candidate to avoid trouble with functions and calibration.

User Manual:

tbd. by BC

Firmware:

04.Nov.2022:  

new beta including vintage presets

you need to reset preset banks and settings after uploading the new firmware in ISE-NIN.

ISENIN_1.0.2B.zip

if you still have the old beta, you have to install again both files with ST-link  and you need to reset preset banks and settings after uploading the new firmware in ISE-NIN.

Firmware Installation

The latest Firmware is on a separate page : ISE-NIN Manuals and Firmware

Instructions for Flashing

• Connect STM LINK to the Motherboard

• Turn ISENIN on

• Open STM Cube Programmer 

• Select ST-Link, select connect

• Select erasing and programming button

• Browse select ISENIN 1.0b-1 Start programming

!! Disconnect the programmer and restart the ISE-nin

• Repeat the procedure described above and select ISENIN 1.0b-2 Start programming

• Disconnect and restart ISE-NIN

1.x → wait

Changelog: (of this page)