View Source

This page contains hi-res pictures of the build process. More will be added while build continues ...

shared by Björn Verbruggen (Unlicensed) and me.

for more details click on the picture, please respect the copyright - please ask before share on other websites, for private usage only.

Unpopulated PCB Pictures

(download the picture and open it local)

TTSH > TTSH rev.3 build pictures > ttsh pcb back.jpg

TTSH > TTSH rev.3 build pictures > ttsh pcb front.jpg

PSU

TTSH > TTSH rev3 build guide > PSU_rev3.jpg

TTSH > TTSH rev.3 build pictures > ttsh_psu.JPG

You should bridge the connections for the choke, and reverse the dc in connector. (notice this is another connector, not the one stated in the BOM)

TTSH > TTSH rev.3 build pictures > ttsh_psu_conn_in.JPG

Mainboard

Preamplifier/ Ringmod

TTSH > TTSH rev.3 build pictures > IMG_3932.JPG

VCO-1

TTSH > TTSH rev.3 build pictures > IMG_3933.JPG

VCO-2

TTSH > TTSH rev.3 build pictures > IMG_3934.JPG

VCO-3

TTSH > TTSH rev.3 build pictures > IMG_3935.JPG

VCO4027

VCF/Mixer

TTSH > TTSH rev.3 build pictures > IMG_3936.JPG

ADSR/AR

TTSH > TTSH rev.3 build pictures > IMG_3937.JPG

VCA

TTSH > TTSH rev.3 build pictures > IMG_3938.JPG

Mixer

TTSH > TTSH rev.3 build pictures > IMG_3939.JPG

Reverb

TTSH > TTSH rev.3 build pictures > IMG_3940.JPG

Amplifiers

TTSH > TTSH rev.3 build pictures > IMG_3928.JPG

S/H

TTSH > TTSH rev.3 build pictures > IMG_3929.JPG

Voltage Processor

TTSH > TTSH rev.3 build pictures > IMG_3930.JPG

Noise

TTSH > TTSH rev.3 build pictures > IMG_3931.JPG

Filtercards

4012 Filter

TTSH > TTSH rev.3 build pictures > 4012_filter.JPG

Notice the LM301 is soldered directly to the pcb. However you should use IC sockets.

There are 2 things to keep in mind:

The BC558B needs to be mounted backwards (flat side of the transistor faces round side of the pcb print):

You have to swap 2 pins of the 3958 - use insulation:

TTSH > TTSH rev.3 build pictures > 4012_3958.JPG

4072 Filtercard