Versions Compared

Version Old Version 25 New Version 26
Changes made by

Patrick Joericke

Patrick Joericke

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Isssue ID 1 is invalid
Panel
borderColor#000000
bgColor#f0f0f0
titleColor#FFFFFF
titleBGColor#4C5356
titleProject

Projecttitel: VS-1

Status: 
Status
colourGreen
titlein planning

Startdate: 06/2020

Duedate: 04/2024

Updated: 25.Jan.2024

Manufacture link: http://abstraktinstruments.com

https://abstraktinstruments.com/vs1-diy/

https://www.kickstarter.com/projects/abstraktinstruments/vs-1-polyphonic-analog-synthesizer/description

Facebook group: (I´m the admin). https://www.facebook.com/groups/849435342474238

send me a message if you dont get access

Modwiggler Build thread:

https://www.modwiggler.com/forum/viewtopic.php?t=281217

...

Expand


Mouser card official from abstract (updated 17.feb2020):

https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=8122018b4d


my mouser BOM:

todo: amount based on earlier BOM - must Change.

part name removed from my mouser cardamountmouser price for amount (left) netto pricesnew suppliernew priceconfirmed (updated in mouser or external)for your pocket..
IC Sockets (not milled) 14pin111,71

x
ic Sockets (not milled) 16pin477,85

x
538-22-23-2031.   not MTA100





538-22-23-2041.   not MTA100





291-0-RC.   not needed - use resistor legs..81,90



5982-15-500V3301639,6 nettoyes - 2% instead of 5% 22,39 brutto !!
20
cd405383,67
ca. 2€ netto
2
ua741329,16
5€ netto
5
Tl0814115,99
7,36
12
TL08285,76
3,7
2
L7815CV83,53
2
1,5
L7915CV84,32
2
2,3
604-WP7113ID81,8use other LED from T with same current and brightness0,4-1€
1
multiturn summary - 100 or other T.



save ca. 20-30€20-30
571-1-2199298-2 8pin sockets .- not milled12014,88use milled
x 
09-48-10442416,7
5,1 (100 items)
11
523-ACJM-MHDR1918,98
10
9
523-ACJS-MHDR22,56
1,x
1
538-26-60-40309












Groupbuy plan: - cancelled, abstrakt instruments offer a Full-partskit for a great price 999USD

shop:

https://www.abstraktinstruments.com/product/vs-1-synth-full-parts-kit/


IDPartamount per device (add more in your order to have spares)notenormal price eachmy estimated price each (depends on the amount of users)total (amount x estimated price)
1AS3310 (IC)16

3-4€
2CA3080 (IC)40
4-5€2.50€
3powersupply1
30-4015-25€
4ua74132
0,30,17
5J112 (Tranny)34
0,30,22
6v2164D /AS21647updated for new 094 BOM3-52,5
75172 /2N5172100
0,3-0,50,1-0,3
8LM3086/LM30468

LM3046M w.Adapter SMD

CA3146/LM3146 better temperature

31-2€
9Tempos PTC 1K16
1,20€0,7-0,8€11,20€
10glimmer caps16



11MN30094new BOM 09410-11€ brutto each
40-45
12cd4053




13 OLED 1,3"
pinout ???  5-10€



...

IDDateBug/Issue/Improvementaffected part/pcbIssueFix reported byreported to developerInfo from developeraffected versionfixed pcb version
1Jan 2024

Silkscreen wrong

Voice Motherboard

diode wrong silksvcreen orientation

D13

Image Modified

install against silkscreenmodwiggler userno
diythis was a wrong issue !!
225.Jan 2024infoPSU

check that your PSU is still modified with other regulators

my psu was still modified with the correct parts

just a visible check and keep in mind to test the psu later without attached Device/pcbsPatrickno
diy
325.Jan 2024build infoVoice and Voice Motherboard

you have to respect that the MOLEX connectors on the Voice Motherboard and Voices have to installed in one step.

You cannot start with soldering the molex connectors at the pcb without align it against the opposite part.

do this: 

option 1:

  1. mark every voice card with a number which match with the voice motherboard slot number
    1. insert the Molex pinheaders in the voice motherboard slot 1 without soldering it
    2. insert in voice 1 the molex connector and solder only one middle pin per connector, correct the alignment If required
    3. insert voice 1 in voice motherboard1 and solder one pin on the voice mobo Molex connector.
    4. check and align - solder more pins.

option 2:

a.  insert in voice 1 the molex connector and solder only one middle pin per connector, correct the alignment If required

b. insert in the connector the connector  which is required for the voice mobo.

c. put the voice to slot 1 and solder it - one pin per connector

d. check, align and solder more pins

do not install the molex for now on voice card and voice motherboard,

ill update this issue point later

Patrickno


427.Jan.2024BOM failure ?Voicecard

Voice Cards BOM lists 1.5M resistor for R7 and R45, but those are already filled with 49.9K resistors as per the BOM and the schematic

wait on validationFacebook Sduck
not validaded nowBOM 1.0.3
527.Jan.2024Bom failure ?Output board

On the Output board - R22 isn’t listed on the BOM, schematic says 2.2K

wait on validationFacebook Sduck
not validaded nowBOM 1.0.3
627.Jan.2024InfoOutput board

C22 is DNP - do not populate


Facebook Sduck
not validaded nowBOM 1.0.3
727.Jan.2024BOM failureOutput Board

Q15, 16, 17, 18 aren’t listed on the BOM

should be 2SC2878Facebook Sduck
not validaded nowBOM 1.0.3
828.jan 2024infoVoicecard

"Note that R140 and R141 are the preinstalled smt resistors on the back."


Facebook Sduck

BOM 1.0.3
928.jan 2024infoVoicecard

"Brian for some reason doesn't list parts that are back in the "Rare Parts" list, so A3 is an CA3086N; A10, A12, A13, A14, A15 are all AS3080E; and A18 and A19 are AS3310."


Facebook Sduck

BOM 1.0.3
1028.jan 2024infoVoicecard

"There is one wrong sized hole on the bottom row of holes for the molex connectors. In one of the videos Brian suggests using a dremel tool to grind down the size of the affected pin, which I tried and it was relatively easy and worked well. I suppose you could also drill out the hole, but you would then also drill out the solder pad, and would need to run a wire jumper from the affected pin to one of the vias to make that work."


Facebook Sduck

BOM 1.0.3
1129.Jan.2024infoVoice MOBO

30k resistor bag is labeled with quantity of 32 - in Altium is 24.

24 are required - BOM 1.03 correct, just the bag is wrong labeledPatrick
valid - 

1229.Jan.2024Important InfoVoice Mobo

dort remove the pcb stripes (from pcb fab - panelized pcb) in case you use a solder frame. otherwise the traces can be damaged


Patrick



1329. Jan 2024improvementVoice Mobo

use 1/4 watt resistors for R66/R67 to improve thermal noise







...