...
ID | date | issue | solution | fixed in production version |
|---|---|---|---|---|
1 | 26.1.2021 | info- ribbon cable | its cheaper 15cm is fine NEVER use Floppy disk cables - this are not 1:1 pin assigned | |
2 | INFO | ic pin out | DAC and LDO is upside down, all other pin1 top-left or check dadatsheet | |
3 | C95A is C15A1 C95B is C15B1 on pcbs |
| ||
4 | 26.1 | bom change (last version is A) | R210 was 1k5 now 1k (SMT led resistor) C95a1 and C95b1 changed to: C95A and C95B added one dip8 socket to bom |
|
5 | 26.1 | install S7 at the end of the build - for prototype version only !!! |
| |
6 | 06.02-2021 | check that no traces are under the slide switch tabs, and check for traces under the potentiometer tabs. | bend or cut them. ( Janne agreed that he change the pcb - production run don't have traces under the switch tabs and pot tabs) | unknown |
My Build:
...
...