JSI Resonator
Projecttitel: JSI Resonator
Status: DONE
Startdate: 2022
Duedate: 2021
Manufacture link: https://www.jsisynth.com/resonator.html
FEATURES :
Resonator is a Polymoog inspired formant filter that is intended to emulate static resonances that are typical for acoustic instruments. Its three non-overlapping bands have frequency, gain and emphasis or resonance controls.
All three bands can be switched between Low pass, High pass and two Band pass modes (Band pass "notch").
SPECIFICATIONS:
BAND RANGES
LOW frequency range: 60Hz-300Hz
MID frequency range: 300Hz-1500Hz
HIGH frequency range: 1500Hz-7500Hz
FILTER MODES
Low pass
Band pass
Band pass "notch"
High pass
CONTROLS FOR ALL BANDS
Cutoff Frequency (CF)
Emphasis (resonance)
Gain
COMMON CONTROLS
Dry Level
Resonance Level
Band mode switch
Bypass switch
IN/OUT
Mono input (1/4" phone jack)
Mono output (1/4" phone jack)
POWER
12VDC (0.1A) power adapter (2.1mm DC jack)
DIMENSIONS
Enclosure 8" x 4" x 1" (203.2mm x 101.6mm x 25.4mm)
BUILD:
RESONATOR-REV-A_DRILL_GUIDE.pdf
note for earlier BOM: don´t install R34 - it must be empty !!
Related content
how to bugfix: https://diysynth.wiki.dsl-man.de/wiki/spaces/SKM/pages/336101402/How+to+bugfix
non commercial pages, all infos are best can do without warranty, without liability.