TTSH Release rev.4

TTSH Release rev.4

the TTSH v4 is the same Version like TTSH rev.3 - but with bugfixes.

 

The TTSH v4 is only available by synthcube - Kits, Fullkits, cases - mostly  everything you want.

https://synthcube.com/cart/ttsh-v4

If you're looking for an assembled TTSH or you want a modification, build, repair - Service- contact me

 

Known Issues:

Update 09/2026:

Risk: R281 in the reverb driver section

In the original circuit, if the reverb input is driven hard into clipping for a long time, the driver stage exceeds its ratings: about 0.87 W in R281 (rated 1/2 W)

Solution Replace R281 with 1Watt Resistor

the Pinout problem of the Dual JFET 2N3954 in the VCO2 section (mainboard) is still available.

 

Frontpanel - all holes must be enhanced by drilling. all slider cutouts must be reworked with a file :slight_frown:

that's not an issue, that's a problem for some users.

Synthcube was informed but still send this panels to customers.

In the Fullkits are many slider pins bend or the lever is broken or bend - you need replacements.

 

 

Build Guide from Antony "Fuzzbass" v1.7 (update 29.dec.2019)

https://drive.google.com/file/d/15LcVl6dmxVoriJ3EP7WcftJFTHrW5Kw-/view?fbclid=IwAR2Egjr7iOgwGv5dcD7pHh6iBK_N2jCJF5T_Xk8CpElvJ6oDoFBHxHXsSns

TTSH Version 4 Build Guide v1_10.pdf
02 Oct 2026, 08:41 PM

added Midi Interface guide in v1.7

 

failure in previous guide: (1.2) corrected in 1.3 guide and newer

there's a failure with the 4012 VCF card, the capacitors between the matched 2N3904 must be 4x 0,01uF (10nF)  C0G or polypropylene caps - 

better to organise 1% Polyprop caps, you can mount it from the rearside too.