MS2600KBD
Projecttitel: MS2600KBD
Status: IN PROGRESS
Startdate:
Duedate: 10/2021
Manufacture link: diysynth.de
The MS2600KBD Project is owned by https://diy-mms.jimdo.com/ms-2600-kbd/
This is an DIY Project !!
Specification:
4 Octaven Manual with Aftertouch (FATAR TP9)
| Octave-Shift about 4 Octaves 2* CV-OUT for Pitch ( 0-8V, 1V/OCT ) 2* GATE (0/10V) 1* Trigger (0/10V – 2ms) 1* Velocity (0-10V, Dynamik adjustable) Monophone, Duophone and Split-Mode |
Sequencer | 7* 64 Steps |
Arpeggio | 7 different Modes |
Sustain-Pedal | On/Off |
Expression Pedal | CV (0..10V) |
MIDI-OUT | Note ON/OFF Velocity Sustain Pitchbend CC vom Ribbo & Joystick |
XY-Joystick | each -10 to +10V (Pegel and Offset adjustable) (X) Pitch-Bend (Y) LFO- Control |
Ribbon-Bar | CV (0..4V oder -4V bis +4V) Gate (0/10V) Relative/Absolute/Centered-Mode |
LFO | two Outputs FM Input 14 Waveforms Waveshaping Sample&Hold Sync 50mHz – 30Hz Delay (fade in) |
Transienten-Generator | Transient-Generator Slew-Limiter Event-Generator Echo-Generator |
Related content
how to bugfix: https://diysynth.wiki.dsl-man.de/wiki/spaces/SKM/pages/336101402/How+to+bugfix
non commercial pages, all infos are best can do without warranty, without liability.