MB6582-own first device

I built a lot of MB6582, on bottom is my first device wit a pactec case (which I didn't recommend anymore ! )

my first MB6582

Frontpanel for OLED (smaller cutout):

MB-6582_frontpanel_gelb_OLED-version.fpd

Screen cover for OLED version:

MB-6582_window_OLED-version.fpd

Rearpanel - for standard switch:

MB-6582_rearpanel_r2_opt.fpd

Screen cover for Schaeffer normal version:

MB-6582_window_2.fpd

Standard Panel Files: make sure there's a NOTE that you want 1.5mm thickness !!!!!!

OLED: "patch"

device_id_00_lcd7.hex

PSU Option A

Solder a bridge at J71 between pin 2 and 3. (This connects V1 common pin to ground).

Solder a bridge at J72 between pin 2 and 3. (This connects V1 output pin to 9v supply lines).

Solder a bridge at J73 between pin 1 and 2. (This connects 5v from power socket/switch to 5v supply lines).

Solder V1, B1, C1, C2, C3, C4, C11, C12.