Tau Pipe Random Source Version

Here are some Infos about the Randomsource Version from 2015

i finished this Version in MOTM Format with THAT300p  IC´s and it sounds great.

for BOM and more Infos please check  http://jhaible.com/ and take a look at the original BOM on my "old" Version page: Juergen Haible Tau Pipe Phaser

lessons learned:

issue:  pitch and CV input dosn't work,

make sure the CV input jack is wired with 3 cables - use the jack switch, otherwise the connection between Pitch and OSC  dosn't work.

(i dont used the CV Mixer)

the PCB of the new randomsource version is in ENIG instead of HASL, you need enough heat on your soldertip.

Gallery